FLASH YOUR A10 A13 ALLWINNER TABLET USING LIVESUIT!
Before Flashing, make sure you have tried the other alternatives first such as Recovery Mode, Wipe Rom Easy and Android Multi Tools. This method is only advisable if all other alternatives didn't work. Such as your USB debugging is not enabled.
Step by Step AllWinner Tablet Flashing Tutorial
1. Charge your Tablet. It must be full charged or not Low Battery.
2. Download your Firmware / Rom corresponding to your Tablet's Model at the AllWinner Rom Section.
3. Download Livesuit 1.11 by clicking here
4. Extract Zip file to your desired location (ex. Desktop)
6. Wait for it to self extract then run Livesuit.exe as Admin
7. A pop up will appear asking if you want a guide for a upgrading. Select NO since you're using my guide.
8. Click Select Img then browse for your downloaded ROM / Firmware .img file. Open.
9. Turn off your Tablet then ready your connector.
10. Hold Volume Up button, connect the tablet to your computer then press power button multiple times slowly.
11. Pop up will appear on Livesuit asking if you want mandatory format, just click yes and yes again.
12. Wait until a pop up says "upgrade succeeds"
Warning: Do not turn off your computer or disconnect the cable while it is flashing!
When tablet automatically boots, flashing is finished.
You can now use your Tablet! If it does not boot, hold the power button to turn it on.
